Surface Diamond (Core) Rigs

Surface Diamond (Core) Rigs

The Azimuth Aligner is suitable for diamond (core) exploration drill rigs, whether shallow or deep, small or large diameter holes.

 

NOTE: The below does not represent an exhaustive list of compatible rig makes/models (including older models). 

Contact Us if you can’t find your rig model below.  

  • Boyles C5
  • Boyles C6
  • Boyles C8C
  • Christensen 140
  • Christensen CT14
  • Christensen CT20

 

 

 

 

 

 

The above Epiroc  Model Range is FULLY COMPATIBLE with the Minnovare Azimuth Aligner.

 

In the case of the Diamec range, the Azimuth Aligner is mounted directly to the drill rod, prior to drilling, with the handheld mobile interface used to display target vs actual Azimuth and dip readings in real time.  Minnovare’s onsite trials demonstrate that the Azimuth Aligner significantly enhances the accuracy of this particular range of rig.

 

  • Ranger DX900i
  • Ranger DX800i
  • Ranger DX800
  • Ranger DX700
  • Ranger DX600
  • Ranger DX500
  • Pantera DP1500i
  • Pantera DP1100i
  • Tiger DG810
  • Tiger DG710
  • Dino DC400R/Ri
  • Commando DC130Ri
  • COmmando DC120

 

The above Sandvik Model Range is FULLY COMPATIBLE with the Minnovare Azimuth Aligner.

 

In the case of the Diamec range, the Azimuth Aligner is mounted directly to the drill rod, prior to drilling, with the handheld mobile interface used to display target vs actual Azimuth and dip readings in real time.  Minnovare’s onsite trials demonstrate that the Azimuth Aligner significantly enhances the accuracy of this particular range of rig.

 

  • LF 70
  • LF 90D
  • LF 160
  • LF 230
  • LF 350e

 

 

 

 

 

 

The above Boart Longyear Model Range is FULLY COMPATIBLE with the Minnovare Azimuth Aligner.

 

In the case of the Diamec range, the Azimuth Aligner is mounted directly to the drill rod, prior to drilling, with the handheld mobile interface used to display target vs actual Azimuth and dip readings in real time.  Minnovare’s onsite trials demonstrate that the Azimuth Aligner significantly enhances the accuracy of this particular range of rig.

 

  • EDM 1200 Series
  • EDM 2000 Series
  • EDMHXR40
  • T500XD LoadSafe
  • T250XD LoadSafe
  • TXD LoadSafe
  • T200XD
  • T130XD
  • T685EX
  • T685WS Track
  • T685WS
  • T455WS
  • T450WS
  • T450GT
  • T450MIIA
  • Fury 130

 

 

The above Schram Model Range is FULLY COMPATIBLE with the Minnovare Azimuth Aligner.

 

In the case of the Diamec range, the Azimuth Aligner is mounted directly to the drill rod, prior to drilling, with the handheld mobile interface used to display target vs actual Azimuth and dip readings in real time.  Minnovare’s onsite trials demonstrate that the Azimuth Aligner significantly enhances the accuracy of this particular range of rig.

 

Send Us A message